MAIN 2 KÊNH BOSA DG225 LÀ MẨU MAIN CAO CẤP ĐÁNH SUB CỰC PHÊ
SETUP LẮP ĐẶT MIỄN PHÍ
Giao hàng Nhanh Tại Tp.HCM
Hỗ trợ Bảo hành nhanh 48H
Thanh toán khi nhận hàng.
0 ₫
Đặc Điểm Nổi Bật
EIAJ test standard, 1 kHz, 1% THD
2 channel mode
8Ω 2*2500W
4Ω 2*4400W
2Ω 2*5500W
1/8 maximum power output in 40: 1457W,8A
1/4 maximum power output in 40: 2564W, 16A
Bridge mode
8Ω 8800W
4Ω 11000W
1/8 maximum power output in 40: 1457W,15.6A
1/4 maximum power output in 40: 2564W, 31,8A
Power: PFC power
Rated power demand: 100-240 V +-10%, 50/60Hz
Operation voltage: 90-270V
Power correction factor cos: >0.95 @ 500W
Standby: 47W and 0.8A
Gain, sensitivity: 32dB, 35dB, 38dB, 41dB
Maximum output voltage/current: 185V/85A(370 in the bridge node)
Power comsumption: 230V(116V in the bridge mode)
Environment temperature: 0°C-45°C/ 32°C-113°F
Cooling system: tunnel through cooling system
Frequency response: 20Hz – 20kHz (1W @ 8 Ω, +-5dB)
Signal to noise ratio: >110dBA (20Hz – 20 kHz, A weighted)
Crosstalk: >66 dB @ 1 kHz
Input impedance: 10 kΩ balanced
Total harmonic distortion (THD): < 0.5% from 1W to full power (typical value <0.05%)
Intermodulation distortion (IMD): < 0.5% from 1W to full power (typical value <0.05%)
Damping factor (8ohm): >5000 @ 20-200 Hz
Slew rate: 50 V/us 8 Ω
Indicator Led/per channel:
*One PCS green Led: the input signal of XLR >=40dB
Four pieces green Led: display the output signal
(-10dB, -10dB, -5dB, -3dB) of SPEAKON
1 piece dual Led (yellow and red):
Protective state/ clip state/ Over heat/ Over load*
Led screen:
* 1display per channel operation mode:
Mono mode, bridge mode and stereo mode;
Display the temperature of the equipment:
the device turns on protective state
and the temperature of the equipment :75°C
Power switch: Press “T” on; Press “O” -off
Dust proof: it can take off to clearn from the buttom of front pannel
Signal in connection:
* 4 channel: one balanced XLR (with lock) female per channe
2 channel: one balanced XLR (with lock) female
and one balanced XLR male per channe *
Signal out connection: one SPEAKON per channel connect to loudspeakers
Power cord: Fixed to the device, and the CSA (cross sectional area) of the
is 3 x 2,5mm2, and the cord is 1,5 meters long
Multiple functions switch: two sensitivity switches, one mode switch and one
Clip switch
Dimensions: 482x44x380mm3/482x44x470mm3
Net weight: 10kg/12kg
Packing size: 580x580x119mm3/615x615x119mm3
Shipping weight: 12kg/14kg
Dịch Vụ Setup Dàn Âm Thanh
Dịch Vụ Setup Vang Số
MAIN 2 KÊNH BOSA DG225 LÀ MẨU MAIN CAO CẤP ĐÁNH SUB CỰC PHÊ
Reviews
There are no reviews yet.